Carrier Commercial VRF Systems

Carrier Commercial HVAC Systems.

Suitable to precisely match the building's cooling and heating demands, Carrier® VRF systems utilize a 2-pipe system for both heat pump and heat recovery. The heat recovery system uses a multi-port distribution controller which acts as a central location allowing better refrigerant distribution to all indoor units. These systems typically take less piping and connections to configure between outdoor unit multi-port distribution and indoor units.

Carrier 3-Phase Heat Pump (38VMH).

3-Phase Heat Pump (38VMH)

The Carrier 38VMH VRF heat pump system is a combination of an outdoor unit with multiple style indoor units connected by refrigerant piping and wiring. Heat pump capacity ranges from 6 tons up to 36 tons in a modular design, available as single, double or triple module.

Performance Features

  • 72,000 to 432,000 Btuh
  • 6.0 to 36.0 Tons
  • Available in 6, 8, 10, 12 ton single module which can be combined up to 36-tons capacity
  • Ability to connect up to 64 multiple style indoor units with a triple module outdoor unit
  • Piping flexibility up to 3280 ft.
  • High performance outdoor units with all inverter-driven scroll compressor
  • DC inverter condenser fan motor
  • 208/230-3-60Hz or 460-3-60Hz voltage
  • Cooling ambient operating temperature is 14⁰ F to 122⁰ F and heating ambient operating temperature is -4⁰ F to 60⁰ F
  • Connected capacity is up to 135%

Reliability Features

  • All equipment wiring complies with NEC requirements
  • Unit constructed in accordance with ETL requirements
  • Unit performance is in accordance with AHRI 1230 standards
  • Compressor and condenser fan motor are inverter driven
  • Finned tube heat exchanger
  • Suitable for R-410a refrigerant

Installation Features

  • System utilizes 2-pipes to connect to up to 64 indoor units
  • Integrated controls design allows for complete system control
  • System can be auto addressed
  • System utilize quick connect controls system

^ Back to Top

Carrier Single-Phase Heat Pump (38VMH-1P).

Single-Phase Heat Pump (38VMH-1P)

The Carrier 38VMH single-phase VRF heat pump system is a combination of an outdoor unit with multiple style indoor units connected by refrigerant piping and wiring. The outdoor units have stacked dual condenser fan with side blow arrangement.

Performance Features

  • 36,000 to 60,000 Btuh
  • 3.0 to 5.0 Tons
  • Up to 18.6 SEER cooling efficiency
  • Up to 10.0 HSPF heating efficiency
  • Available in 3, 4 & 5-ton capacity range
  • 208/230-1-60Hz power supply
  • Ability to connect up to 9 multiple style indoor units on a 5 ton system
  • 2-pipe heat pump system
  • High performance outdoor unit with Inverter-driven scroll compressor
  • Cooling Operating Range: 5° F to 118° F
  • Heating Operating Range: 5° F to 64° F
  • Connected capacity up to 130%
  • Quiet outdoor operation, as low as 58.7 dB(A)

Reliability Features

  • All equipment wiring complies with NEC requirements
  • Unit constructed in accordance with ETL requirements
  • Finned tube heat exchanger
  • Suitable for R-410a refrigerant

Installation Features

  • Factory provided controls
  • Single point electric connections

^ Back to Top

Carrier 3-Phase Heat Recovery (38VMR).

3-Phase Heat Recovery (38VMR)

The Carrier 38VMR VRF 2-pipe heat recovery system is a combination of an outdoor unit with multiple style indoor units connected by refrigerant piping and wiring. Heat recovery outdoor unit lineup is a single module up to 28 tons, available as small and medium cabinet size.

Performance Features

  • 72,000 to 336,000 Btuh
  • 6.0 to 28.0 Tons
  • Available in 6 - 28 ton non modular design
  • Industries most compact 20 ton VRF system
  • Ability to connect up to 64 indoor units
  • 2-pipe heat recovery system
  • High performance outdoor units with all inverter driven scroll compressor
  • DC inverter condenser fan motor
  • 208/230-3-60Hz or 460-3-60Hz voltage
  • Cooling ambient operating temperature is 14⁰ F to 122⁰ F and heating ambient operating temperature is -13⁰ F to 60⁰ F
  • Connected capacity is up to 150%

Reliability Features

  • All equipment wiring complies with NEC requirements
  • Unit constructed in accordance with ETL requirements
  • Unit performance is in accordance with AHRI 1230 standards
  • Compressor and condenser fan motor are inverter driven
  • Finned tube heat exchanger
  • Suitable for R-410a refrigerant

Installation Features

  • System utilizes 2 pipes to connect to multiport distribution controller(s)and up to 64 indoor units
  • Integrated controls design allows for complete system control
  • Single power connection for 28 ton systems
  • System utilize quick connect controls system

^ Back to Top

Carrier Outside Air Duct (40VMA).

Carrier Outside Air Duct (40VMA)

The Carrier Outside Air draws in ventilation air into the space to provide fresh air. The units are installed in plenum and can be connected to a heat pump or heat recovery system along with other styles of indoor unit.

Performance Features

  • 36,000 - 96,000 Btuh
  • 3.0 to 8.0 Tons
  • 208/230V-1-60Hz voltage
  • Unit can handle up to 1.0 in. wg of ESP
  • DC fan motor
  • Multiple fan speeds
  • For sizes 72 and 96, condensate pump is available an accessory

Reliability Features

  • All equipment wiring complies with NEC requirements
  • Unit constructed in accordance with ETL requirements
  • DC fan motor
  • Finned tube heat exchanger
  • Suitable for R-410a refrigerant

Installation Features

  • Controls quick connects standard
  • All settings can be done from the remote controller
  • Unit comes standard with IR receiver

^ Back to Top

Carrier Compact 4-Way Cassette (40VMC).

Carrier Compact 4-Way Cassette (40VMC)

The Carrier Compact 4-Way Cassette provides supreme comfort by delivering conditioned air flow in four directions while fitting a standard T grid ceiling.

Performance Features

  • 5,000 to 15,000 Btuh
  • 0.4 to 1.25 Tons
  • 208/230V-1-60Hz voltage
  • Delivers air in all four directions
  • DC fan motor
  • Multiple fan speeds
  • Built-in condensate drain pump
  • Louver control (fixed or swing)
  • Fits in a standard grid ceiling

Reliability Features

  • All equipment wiring complies with NEC requirements
  • Unit constructed in accordance with ETL requirements
  • DC inverter driven fan motor
  • Finned tube heat exchanger
  • Suitable for R-410a refrigerant

Installation Features

  • Controls quick connects standard
  • All settings can be done from the remote controller
  • Unit comes standard with IR receiver

^ Back to Top

Carrier Multiport Distribution Controller (40VMD).

Carrier Multiport Distribution Controller (40VMD)

The Carrier VRF multiport distribution controller (MDC) allows you to connect from 6 to 16 indoor units based on number of ports. The main multi-port distribution controller can connect up to two sub multi-port distribution controllers.

Performance Features

  • 6, 8, 10 & 16 Ports
  • 208/230V-1-60Hz voltage
  • Quick connect for control wiring
  • No port addressing
  • Painted cabinet
  • Sub multiport distribution controller offering

Reliability Features

  • All equipment wiring complies with NEC requirements
  • Unit constructed in accordance with ETL requirements
  • DC fan motor
  • Finned tube heat exchanger
  • Suitable for R-410a refrigerant

Installation Features

  • Controls quick connects standard
  • All settings can be done from the remote controller
  • Unit comes standard with IR receiver

^ Back to Top

Carrier 4-Way Cassette (40VMF).

Carrier 4-Way Cassette (40VMF)

The Carrier VRF 4-Way Cassette provides supreme comfort by delivering conditioned air flow in four directions to customize the airflow control based on user comfort preferences.

Performance Features

  • 9,000 to 48,000 Btuh
  • 0.75 to 4.0 Tons
  • 208/230V-1-60Hz voltage
  • Delivers air in all four directions
  • DC fan motor
  • Multiple fan speeds
  • Knock out for OA opening
  • Knock out for branch ducting
  • Louver control (fixed or swing)
  • Built-in condensate drain pump

Reliability Features

  • All equipment wiring complies with NEC requirements
  • Unit constructed in accordance with ETL and ETL, Canada standards
  • DC inverter driven fan motor
  • Finned tube heat exchanger
  • Suitable for R-410a refrigerant

Installation Features

  • Controls quick connects standard
  • All settings can be done from the remote controller
  • Unit comes standard with IR receiver

^ Back to Top

Carrier High Static Duct (40VMH).

Carrier High Static Duct (40VMH)

The Carrier High Static Ducted indoor units can handle higher static to support longer ductwork for a given space and are ideal for hideaway applications serving multiple zones.

Performance Features

  • 24,000 - 96,000 Btuh
  • 2.0 to 8.0 Tons
  • 208/230V-1-60Hz voltage
  • Unit can handle up to 1.0 in. wg of ESP
  • DC fan motor
  • Multiple fan speeds
  • Integrated condensate lift up to 28”, for sizes up to 54
  • For sizes 72 and 96, condensate pump is available an accessory

Reliability Features

  • All equipment wiring complies with NEC requirements
  • Unit constructed in accordance with ETL requirements
  • DC Inverter fan motor
  • Finned tube heat exchanger
  • Suitable for R-410a refrigerant

Installation Features

  • Controls quick connects standard
  • All settings can be done from the remote controller
  • Unit comes standard with IR receiver

^ Back to Top

Carrier Low Static Duct (40VML).

Carrier Low Static Duct (40VML)

The Carrier VRF Slim Duct (low static) unit is only 8-1/4" in height making it an ideal candidate for narrow plenum space applications.

Performance Features

  • 7,000 to 24,000 Btuh
  • 0.5 to 2.0 Tons
  • 208/230V-1-60Hz voltage
  • Unit can handle up to 0.2 in. wg of ESP
  • DC fan motor
  • Multiple fan speeds
  • Built-in condensate drain pump
  • Reversible return air arrangement - rear or bottom

Reliability Features

  • All equipment wiring complies with NEC requirements
  • Unit constructed in accordance with ETL requirements
  • DC fan motor
  • Finned tube heat exchanger
  • Suitable for R-410a refrigerant

Installation Features

  • Controls quick connects standard
  • All settings can be done from the remote controller
  • Unit comes standard with IR receiver

^ Back to Top

Carrier Medium Static Duct (40VMM).

Carrier Medium Static Duct (40VMM)

The Carrier VRF Medium Static Duct unit is ideal for single room hideaway or ducted applications.

Performance Features

  • 7,000 to 48,000 Btuh
  • 0.5 to 4.0 Tons
  • 208-230V-1-60Hz voltage
  • Unit can handle up to 0.6 in. WG of ESP
  • DC fan motor
  • Multiple fan speeds
  • Knock out for fresh air opening
  • Built-in condensate drain pump
  • Reversible return air arrangement - rear to bottom

Reliability Features

  • All equipment wiring complies with NEC requirements
  • Unit constructed in accordance with ETL requirements
  • DC fan motor
  • Finned tube heat exchanger
  • Suitable for R-410a refrigerant

Installation Features

  • Controls quick connects standard
  • All settings can be done from the remote controller
  • Unit comes standard with IR receiver

^ Back to Top

Carrier Floor Console (40VMR).

Carrier Floor Console (40VMR)

The Carrier VRF Floor Console - Recessed units can be installed inside a wall or custom-built cabinet to match interior space design.

Performance Features

  • 7,000 to 24,000 Btuh
  • 0.5 to 2.0 Tons
  • 208/230V-1-60Hz voltage
  • DC fan motor
  • Multiple fan speeds
  • Adjustable filter rack up to 2"
  • Handle up to 0.15" of ESP
  • Complete hideaway unit

Reliability Features

  • All equipment wiring complies with NEC requirements
  • Unit constructed in accordance with ETL requirements
  • DC fan motor
  • Finned tube heat exchanger
  • Suitable for R-410a refrigerant

Installation Features

  • Controls quick connects standard
  • All settings can be done from the remote controller
  • Unit comes standard with IR receiver

^ Back to Top

Carrier Underceiling Indoor Unit (40VMU).

Carrier Underceiling Indoor Unit (40VMU)

The Carrier VRF Underceiling unit can be installed exposed below the ceiling or floor standing as a Floor Console unit.

Performance Features

  • 12,000 to 48,000 Btuh
  • 1.0 to 4.0 Tons
  • 208/230V-1-60Hz voltage
  • Convertible: Underceiling - Floor Console
  • DC fan motor
  • Multiple fan speeds
  • Knock out for OA opening
  • Louver control (fixed or swing)
  • Built-in IR receiver and display panel

Reliability Features

  • All equipment wiring complies with NEC requirements
  • Unit constructed in accordance with ETL requirements
  • DC fan motor
  • Finned tube heat exchanger
  • Suitable for R-410a refrigerant

Installation Features

  • Controls quick connects standard
  • All settings can be done from the remote controller
  • Unit comes standard with IR receiver

^ Back to Top

Carrier Vertical AHU (40VMV).

Carrier Vertical AHU (40VMV)

The Carrier VRF Vertical Air Handling unit is a multi-positional unit - vertical and horizontal - ideal for closet applications.

Performance Features

  • 18,000 to 53,500 Btuh
  • 1.5 to 4.5 Tons
  • 208/230V-1-60Hz voltage
  • DC fan motor
  • Multiple fan speeds
  • Built-in IR receiver
  • Multi positional - vertical or horizontal

Reliability Features

  • All equipment wiring complies with NEC requirements
  • Unit constructed in accordance with ETL requirements
  • DC fan motor
  • Finned tube heat exchanger
  • Suitable for R-410a refrigerant

Installation Features

  • Controls quick connects standard
  • All settings can be done from the remote controller
  • Unit comes standard with IR receiver

^ Back to Top

High Wall Indoor Unit (40VMW).

High Wall Indoor Unit (40VMW)

The Carrier VRF High Wall unit mounts on the wall proving conditioned air to fit any type of space.

Performance Features

  • 7,000 to 30,000 Btuh
  • 0.5 to 2.5 Tons
  • 208/230V-1-60Hz voltage
  • Available in seven different capacities
  • Dual guided air design provides smoother and comfortable air flow
  • DC fan motor
  • Multiple fan speeds
  • Built-in display
  • Louver control (fixed or swing)

Reliability Features

  • All equipment wiring complies with NEC requirements
  • Unit constructed in accordance with ETL requirements
  • DC fan motor
  • Finned tube heat exchanger
  • Suitable for R-410a refrigerant

Installation Features

  • Controls quick connects on all indoor units
  • All indoor unit settings can be done from the remote controller
  • Unit comes standard with IR receiver

^ Back to Top

Wireless Remote Controller (40VM900001).

Wireless Remote Controller (40VM900001)

The Carrier VRF Wireless Remote Controller is a handheld thermostat that maintains room temperature by controlling indoor unit operation through transmission of signal that is free of obstruction.

Product Features

  • Mode setting
  • Fan speed setting
  • Setpoint display
  • Louver swing setting
  • ON / OFF
  • Clock & timer setting
  • Lock function
  • Addressing capability

Installation Features

  • Minimum voltage for signal transmission is 2.4V
  • Effective receiving range is 26ft to 30ft
  • Rated voltage is 3.0V (2 AAA alkaline batteries)
  • White color casing

^ Back to Top

Non-Programmable Wired Remote Controller (40VM900002).

Non-Programmable Wired Remote Controller (40VM900002)

The Carrier VRF Wired Remote Controller (Non-Programmable) is a wall mounted thermostat that maintains room temperature by controlling system operation.

Product Features

  • Simple & easy to use
  • Mode setting
  • Fan speed setting
  • Dual setpoint control
  • Louver swing setting
  • ON / OFF
  • Touch button
  • Backlight
  • Group control (Max 16 IDU)
  • Addressing capability
  • Error display

Installation Features

  • Controller is powered from indoor unit

^ Back to Top

Programmable Wired Remote Controller (40VM900003).

Programmable Wired Remote Controller (40VM900003)

The Carrier VRF Wired Remote Controller (Programmable) is a wall mounted thermostat that maintains room temperature by controlling system operation.

Product Features

  • Simple & easy to use
  • Mode setting
  • Fan speed setting
  • Dual setpoint control
  • Weekly scheduling
  • Louver swing setting
  • ON / OFF
  • Touch button
  • Backlight
  • Group control (Max 16 IDU)
  • Addressing capability
  • Error display

Installation Features

  • Controller is powered from indoor unit

^ Back to Top

Touch Screen Wired Controller (40VM900005).

Touch Screen Wired Controller (40VM900005)

The Touch Screen Wired Controller is a low voltage controller mounted on the wall that maintains room temperature by controlling the Carrier VRF system operation. The controller is capable of displaying temperature from 54° F to 86° F for standard indoor unit and 50° F to 86° F for outside air unit.

Product Features

  • Group control (max 16 indoor units)
  • Dual setpoint control
  • Weekly scheduling
  • Touch screen
  • Mode Setting: Fan Speed, Swing
  • Room temperature display
  • Controls up to 384 indoor units
  • Addressing capability
  • Error code display
  • 1° F temperature indication

Installation Features

  • Interface is powered from field-supplied 24VAC power

^ Back to Top

Touch Screen Central Controller (40VM900006).

Touch Screen Central Controller (40VM900006)

The Touch Screen Central Controller is a low voltage controller mounted on the wall that provides site-level control of multiple Carrier VRF systems. The controller allows central management of mode, set-point and scheduling of indoor units.

Product Features

  • Three levels of account management, up to 20 users
  • Remote access to the system
  • Alarm notification via email
  • Dual setpoint control
  • Weekly scheduling
  • Settings: Mode, Fan Speed, Swing, Temperature Range and Dual Set Point Control
  • Digital input and digital output
  • Controls up to 384 indoor units
  • Recognize units automatically
  • Error code display

Installation Features

  • Interface is powered from field-supplied 24VAC power

^ Back to Top

24V Interface (40VM900008).

24V Interface (40VM900008)

The 24V Interface for Carrier VRF (Variable Refrigerant Flow) systems is a device that enables the use of a conventional 24VAC thermostat with indoor units. The Interface receives 24VAC signals for Cool, Heat, and Fan. This translates these commands to the system's communication protocol and sends the commands to indoor unit over the HA / HB communication bus.

Product Features

  • One interface per indoor unit
  • Cool / Heat / Fan inputs
  • Indoor use only

Installation Features

  • Interface is powered from field-supplied 24VAC power
  • Should be installed in a junction box

^ Back to Top

BACnet Interface (40VM900052).

BACnet Interface (40VM900052)

The BACnet Interface is a low voltage controller mounted on the wall that provides site-level control of multiple Carrier VRF systems. The BACnet Interface provides BACnet IP communication with the VRF system(s) and in addition, it provides central management of mode, set point and scheduling of indoor units through its web browser interface.

Product Features

  • Four ports, each port can access 64 indoor units or eight refrigerant systems
  • Web browser interface allows login through web
  • Indoor unit - Temperature setting, Operation Mode, error code and scheduling
  • Outdoor unit - Operation Mode and error code

Installation Features

  • Interface is powered from field-supplied 24VAC power

^ Back to Top